Enabling NixOS with Flakes
Enabling Flakes Support
Flakes provide improved reproducibility and a more organized package structure, making it easier to maintain NixOS configurations compared to the traditional approach. Therefore, it is recommended to manage NixOS using Flakes.
However, as Flakes is still an experimental feature, it is not enabled by default. To enable Flakes, you need to modify the /etc/nixos/configuration.nix file as follows:
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running 'nixos-help').
{ config, pkgs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
];
# Omit the previous configuration...
# Enable Flakes and the new command-line tool
nix.settings.experimental-features = [ "nix-command" "flakes" ];
environment.systemPackages = with pkgs; [
# Flakes use Git to pull dependencies from data sources, so Git must be installed first
git
vim
wget
curl
];
# Set default editor to vim
environment.variables.EDITOR = "vim";
# Omit the rest of the configuration...
}To apply the changes, run sudo nixos-rebuild switch. After that, you can start writing the configuration for NixOS using Flakes.
Switching to flake.nix for System Configuration
After enabling flakes, whenever you run sudo nixos-rebuild switch, it will first attempt to read the /etc/nixos/flake.nix file. If the file is not found, it will fallback to /etc/nixos/configuration.nix.
To learn how to write a Flakes configuration, you can refer to the official Flakes templates provided by Nix. To check the available templates, run the following command:
nix flake show templatesThe templates#full template contains examples covering various use cases. Let's take a look at them:
nix flake init -t templates#full
cat flake.nixAfter reviewing the example, create a file named /etc/nixos/flake.nix and copy the content of the example into it. From now on, all system modifications will be managed by Flakes using /etc/nixos/flake.nix.
Note that the copied template cannot be used directly. You need to modify it to make it work. Here's an example of /etc/nixos/flake.nix:
{
description = "Ryan's NixOS Flake";
# This is the standard format for flake.nix.
# `inputs` are the dependencies of the flake,
# and `outputs` function will return all the build results of the flake.
# Each item in `inputs` will be passed as a parameter to
# the `outputs` function after being pulled and built.
inputs = {
# There are many ways to reference flake inputs.
# The most widely used is `github:owner/name/reference`,
# which represents the GitHub repository URL + branch/commit-id/tag.
# Official NixOS package source, using nixos-unstable branch here
nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
# home-manager, used for managing user configuration
home-manager = {
url = "github:nix-community/home-manager/release-23.05";
# The `follows` keyword in inputs is used for inheritance.
# Here, `inputs.nixpkgs` of home-manager is kept consistent with
# the `inputs.nixpkgs` of the current flake,
# to avoid problems caused by different versions of nixpkgs.
inputs.nixpkgs.follows = "nixpkgs";
};
};
# `outputs` are all the build result of the flake.
#
# A flake can have many use cases and different types of outputs.
#
# parameters in function `outputs` are defined in `inputs` and
# can be referenced by their names. However, `self` is an exception,
# this special parameter points to the `outputs` itself(self-reference)
#
# The `@` syntax here is used to alias the attribute set of the
# inputs's parameter, making it convenient to use inside the function.
outputs = { self, nixpkgs, ... }@inputs: {
nixosConfigurations = {
# By default, NixOS will try to refer the nixosConfiguration with
# its hostname, so the system named `nixos-test` will use this one.
# However, the configuration name can also be specified using:
# sudo nixos-rebuild switch --flake /path/to/flakes/directory#<name>
#
# The `nixpkgs.lib.nixosSystem` function is used to build this
# configuration, the following attribute set is its parameter.
#
# Run the following command in the flake's directory to
# deploy this configuration on any NixOS system:
# sudo nixos-rebuild switch --flake .#nixos-test
"nixos-test" = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
# The Nix module system can modularize configuration,
# improving the maintainability of configuration.
#
# Each parameter in the `modules` is a Nix Module, and
# there is a partial introduction to it in the nixpkgs manual:
# <https://nixos.org/manual/nixpkgs/unstable/#module-system-introduction>
# It is said to be partial because the documentation is not
# complete, only some simple introductions.
# such is the current state of Nix documentation...
#
# A Nix Module can be an attribute set, or a function that
# returns an attribute set. By default, if a Nix Module is a
# function, this function have the following default parameters:
#
# lib: the nixpkgs function library, which provides many
# useful functions for operating Nix expressions:
# https://nixos.org/manual/nixpkgs/stable/#id-1.4
# config: all config options of the current flake, every useful
# options: all options defined in all NixOS Modules
# in the current flake
# pkgs: a collection of all packages defined in nixpkgs,
# plus a set of functions related to packaging.
# you can assume its default value is
# `nixpkgs.legacyPackages."${system}"` for now.
# can be customed by `nixpkgs.pkgs` option
# modulesPath: the default path of nixpkgs's modules folder,
# used to import some extra modules from nixpkgs.
# this parameter is rarely used,
# you can ignore it for now.
#
# The default parameters mentioned above are automatically generated by Nixpkgs.
# However, if you need to pass other non-default parameters to the submodules,
# you'll have to manually configure these parameters using `specialArgs`.
# you must use `specialArgs` by uncomment the following line:
#
# specialArgs = {...}; # pass custom arguments into all sub module.
modules = [
# Import the configuration.nix here, so that the
# old configuration file can still take effect.
# Note: configuration.nix itself is also a Nix Module,
./configuration.nix
];
};
};
};
}We defined a NixOS system called nixos-test with a configuration file at ./configuration.nix, which is the classic configuration we modified before. Therefore, we can still make use of it.
To apply the configuration to a system with hostname nixos-test, run sudo nixos-rebuild switch --flake /etc/nixos#nixos-test. No changes will be made to the system because we imported the old configuration file in /etc/nixos/flake.nix, so the actual state we declared remains unchanged.
The comments in the above code are already quite detailed, but let's emphasize a few points here:
Default parameters like
lib,pkgs,config, and others are automatically generated by Nixpkgs and can be automatically injected into submodules without the need for additional declarations here.In
specialArgs = {...};, the content of the attribute set is omitted here. Its contents are automatically injected into submodules through name matching.- A common usage, for instance, is to directly write
specialArgs = inputs;, enabling all data sources from theinputsattribute set to be used in the submodules.
- A common usage, for instance, is to directly write
Managing System Packages with Flakes
After the switch, we can manage the system using Flakes. One common requirement is installing packages. We have previously seen how to install packages using environment.systemPackages from the official nixpkgs repository.
Now let's learn how to install packages from other sources using Flakes. This provides greater flexibility, particularly when it comes to specifying software versions. Let's use Helix editor as an example.
First, we need to add Helix as an input in flake.nix:
{
description = "NixOS configuration of Ryan Yin";
# ...
inputs = {
# ...
# Helix editor, using version 23.05
helix.url = "github:helix-editor/helix/23.05";
};
outputs = inputs@{ self, nixpkgs, ... }: {
nixosConfigurations = {
nixos-test = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
# Set all input parameters as specialArgs of all sub-modules
# so that we can use the `helix`(an attribute in inputs) in sub-modules directly.
specialArgs = inputs;
modules = [
./configuration.nix
];
};
};
};
}Next, update configuration.nix to install helix from the helix input:
# Nix will automatically inject `helix` from specialArgs
# into the third parameter of this function through name matching
{ config, pkgs, helix, ... }:
{
# Omit other configurations...
environment.systemPackages = with pkgs; [
git
vim
wget
curl
# Install Helix from the `helix` input
helix.packages."${pkgs.system}".helix
];
# Omit other configurations...
}To deploy the changes, run sudo nixos-rebuild switch. After that, you can start the Helix editor by running the hx command.
Adding Custom Cache Mirrors
If you don't need to customize the cache mirror, you can safely skip this section.
To accelerate package building, Nix provides https://cache.nixos.org to cache build results and avoid rebuilding packages locally.
With the classic configuration method in NixOS, additional cache sources can be added using nix-channel. However, Nix Flakes strives to avoid using any system-level configurations or environment variables as much as possible, ensuring that its build results are not affected by the environment. Therefore, after switching to Flakes, the nix-channel command becomes ineffective.
To customize the cache source, we must add the related configuration in flake.nix using the nixConfig parameter. Here's an example:
{
description = "NixOS configuration of Ryan Yin";
nixConfig = {
experimental-features = [ "nix-command" "flakes" ];
substituters = [
# Replace the official cache with a mirror located in China
"https://mirrors.ustc.edu.cn/nix-channels/store"
"https://cache.nixos.org/"
];
After adding the new substituters, it still won't take effect. In this case, when directly deploying the configuration, you'll encounter the following warnings:
...
warning: ignoring untrusted substituter 'https://mirrors.ustc.edu.cn/nix-channels/store', you are not a trusted user.
...This is a security limitation of Nix, where only trusted users can properly use the set substituters. Therefore, we need to add our own user to the trusted list. Add the following configuration to any NixOS module:
{
# ... (other configurations omitted)
Now, to apply the configuration and make it effective, use sudo nixos-rebuild switch. Nix will prioritize searching for cached packages from the domestic mirror source after the switch.